ICON A5 MM : Flight Controls : Yaw Controls : Maintenance Instructions : Remove 1.2 Pedal Adjustment Gas Strut
Remove 1.2 Pedal Adjustment Gas Strut
100805-00
Use this task to remove the 1.2 style pedal adjustment gas strut.
Applicable Aircraft Serial Numbers
00012, 00021+
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
06—Flight Controls
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. Adjust pedals to full aft position.
2. If necessary, remove respective IP top to gain access to forward side of pedals. (See Right Instrument Panel Top Panel Removal, Left Instrument Panel Top Panel Removal, and G3X Instrument Panel Top Panel Removal.)
3. Remove forward and aft floorboards. (Remove Cockpit Floorboard)(Remove Cockpit Floorboard)
4. Remove hardware securing forward pedal closeout panel. Remove closeout panel.
5. Remove end fitting from release head at forward end gas strut. See Figure 170.
Figure 170. Release Head
6. Loosen jam nut securing release head to forward floor support bracket. See Figure 171.
Figure 171. Jam Nut
7. Unthread release head from gas strut.
8. Using protective material and pliers, secure body of adjustment gas strut from rotating and remove nut securing gas strut to strut bracket. Retain nut.
9. Remove gas strut.
Verification Method
The gas strut has been removed.