ICON A5 MM : Equipment and Furnishings : Equipment and Furnishings General Maintenance : Center Console Bucket Removal
Center Console Bucket Removal
100079-00
Use the following procedure to remove the center console bucket.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
05—Equipment and Furnishing
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. Remove 2X Screws which secure the FWD edge of the center console bucket. Retain all fastening hardware. Figure 76
Figure 76. FWD Edge Bucket Screws
2. Remove 2X Screws which secure the center armrest. Retain all fastening hardware. Figure 77
Figure 77. Center Armrest Screws
3. Lift the center console bucket, disconnect the electrical connections and remove. Label the wires for later installation. The connections are: cigarette lighter connectors — T9117(+) and T9119(-); USB power connectors — T9120(-) and T9116 (+); Aux audio in jack — D9063P. Figure 78
Figure 78. Center Console Bucket Removal
Verification Method
Procedure is complete when the center console is removed.