ICON A5 MM : Electrical System : Electrical System General Maintenance : Replace Relays
Replace Relays
100884-00
The following is used to replace the relay(s) located in the panel above the ECU.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
ICA011256 (RELAY, MICRO, 12VDC)
Aircraft System and Number
03—Electrical System
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. Remove the Aft bulkhead baggage panel. See Removal and Installation of Inspection Panels and Fairings.
2. Locate relay panel on the passenger side above the ECU.
3. Remove the desired relay(s) and discard.
4. Install new relay(s) by fully inserting them in the socket(s) where the previous relay(s) was removed.
Note: 
Ensure insertion of new relay(s) does not dislodge push-on terminals underneath relay socket(s).
5. Install the Aft bulkhead baggage panel. See Removal and Installation of Inspection Panels and Fairings.
Verification Method
Confirm function of the replaced relay(s) by testing the corresponding system.